Our
T-18 crimps Weather Pack terminals and seals. Its
compact, low-cost parallel jaw design eliminates
terminal rocking. This tool, which is offered exclusively
by White Products, also crimps Metri-Pack terminals
and seals.
T-12 Weather Pack Terminal
and Seal Crimper Equivalent to: Delphi/Packard
12014254,
SPX Kent Moore J-38852
Crimps
Weather Pack terminal and seal in one cycle.
Features two double cavities, an orientation block
and a ratchet mechanism to ensure that each crimp
cycle is completed. Factory calibrated to be used
only with Weather Pack terminals and seals. Wire
range 20-14.
T-13 Seal and Open Barrel
Terminal Crimper Equivalent
to: Delphi/Packard 12085270,
SPX Kent Moore J-38125-6
Five
cavities cover a wide variety of Weather Pack and
Metri-Pack applications. Ratchet mechanism ensures
that each crimp cycle is completed. Wire range 20-14.
T-17 Seal and Open Barrel
Terminal Crimper
This
special-purpose tool crimps 12-gauge Weather Pack
terminals along with sealed Metri-Pack 280 terminals
in the largest wire sizes, 12 and 10 AWG. It can
also be used to perform the conductor crimp on most
other open barrel terminals in the 12-10 range. The
ratchet mechanism ensures that each crimp cycle is
completed. (Released June 2004.)
T-3 Weather Pack Terminal
Release Tool
Equivalent to: Delphi/Packard 12014012,
SPX Kent Moore J-38125-10AM
Designed solely to depress Weather Pack terminal
retention barbs to allow terminal removal
from tower or shroud.
